Introduction to ActiveCore product family

In the context where broadcasters are concerned about providing the highest QoS with extending coverage of the existing transmitters and, at the same time, reducing their network OPEX costs and limiting impact on the environment, Avateq Corp. introduces ActiveCore Line of products to addresses broadcasting industry today’s the most demanding needs for monitoring and diagnostic of:

  • transmitter system performance
  • transmitted signal quality
  • off-air signal quality
  • on-channel and in-band interference
  • SFN/Echo profile at a reception point

ActiveCore Line of Products:

AVQ200 - RF Signal Inspector1 AVQ1020 - RF Layer Monitroing Receiver AVQ1022 - RF Signal Analyzer2
AVQ200 - RF Signal Inspector AVQ1020 - RF Layer Monitoring Receiver AVQ1022 - RF Signal Analyzer
LINKS
Webpage https://www.avateq.com/avq200-rf-signal-inspector.php https://www.avateq.com/avq1020-rf-layer-monitoring-receiver.php https://www.avateq.com/avq1022-rf-signal-analyzer.php
Wiki Page AVQ200 - RF Signal Inspector AVQ1020 - RF Layer Monitoring Receiver AVQ1022 - RF Signal Analyzer
GENERAL
RF Quality Medium (MER ~40-42dB) High (MER >50dB) High (MER >50dB)
Analyzed Bandwidth 6MHz 18MHz 18MHz
IP Transport Stream Y N Y
Off-air Monitoring Y N Y
Tx Out Monitoring N Y Y
SUPPORTED STANDARDS
ATSC 1.0 Y Y Y
ATSC 3.0 Y Y Y
DAB/DAB+ Y Y Y
ISDB-T/Tb Y Y Y
DVB-T23 Y Y Y
ATSC 3.0 SIGNALING
LLS and LMT Tables Y Y Y
Service Signaling and Detailed Payload Y N Y
MONITORING INTERFACES
WebGUI Y Y Y
SNMP v2/v3 Y Y Y
E-mail Y Y Y
MQTT Y Y Y
OPTIONS
2nd RF Input N Y Y
Wi-Fi Y N N
ATSC 3.0 STL N N Y

Legends:

Y - Yes, supported
N - No, not supported

Notes:

1 - AVQ200 cannot be used for Emission Mask compliance
2 - AVQ1022 is available in 1U case (AVQ1022) and portable case (AVQ1022m, shown on image)
3 - experimental DVB-T2 support is available upon request